Not Yet Rated Our Rating

Not Yet Rated Avg. User Rating

* *.:: Samsung ::.* *Samsung SGH600/2100DB

* IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 # albo * # 0 8 3 7 #
Net Monitor: * # 0 3 2 4 #
Chaning LCD contrast: * # 0 5 2 3 #
Memory info: * # 0 3 7 7 # albo * # 0 2 4 6 #
Reset pamieci (SIMLOCK`a removing!!!): *2767*3855#
Reset pamieci CUSTOM: *2767*2878#
Battery state: * # 9 9 9 8 * 2 2 8 #
Alarm beeper: *#9998*289#
Vibra test: *#9998*842# *.:: Dancall ::.* IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 # *.:: Philips ::.* *#3333*# Displays a
blocking list.
*#7489*# Displays a confidence code.
*#06# Displays a IMEI number.
*#8377*# Displays a SW info
Secret Codes

*#06# -> Show IMEI
*#9999# -> Show Software Version
*#0837# -> Show Software Version (instructions)
*#0001# -> Show Serial Parameters
*#9125# -> Activates a smiley when charging.

*#9998*228# -> Battery standing (capacity, voltage, temperature)
*#9998*246# -> Program standing
*#9998*289# -> Change Alarm Buzzer Frequency
*#9998*324# -> Debug screens
*#9998*364# -> Watchdog
*#9998*377# -> EEPROM Error Stack – Use side keys to name values. Cancel as well as ok.
*#9998*427# -> Trace Watchdog
*#9998*523# -> Change LCD contrariety – Only with chronicle G60RL01W
*#9998*544# -> Jig acknowledge
*#9998*636# -> Memory standing
*#9998*746# -> SIM File Size
*#9998*778# -> SIM Service Table
*#9998*785# -> RTK (Run Time Kernel) errors – if ok afterwards phn is reset, info is put in mental recall error. *#9998*786# -> Run, Last UP, Last DOWN
*#9998*837# -> Software Version
*#9998*842# -> Test Vibrator – Flash a screenligth during 10 seconds as well as quivering activated.
*#9998*862# -> Vocoder Reg – Normal, Earphone or carkit can be comparison
*#9998*872# -> Diag
*#9998*947# -> Reset On Fatal Error
*#9998*999# -> Last/Chk

*#9998*9266# -> Yann debug shade (=Debug Screens?)
*#9998*9999# -> Software chronicle

*0001*s*f*t# -> Changes method parameters (s=?, f=0,1, t=0,1) (incomplete)
*0002*?# -> different
*0003*?# -> different

SP-unlock SGH-600 as well as SGH 2100

*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!! )
But additionally changes IMEI to 447967-89-400044-0, To revive your aged IMEI have make use of of a IMEI module found upon a program page.

*2767*2878# -> Custom EEEPROM Reset

These codes has been tested with chronicle FLD_2C6 G60SB03X of Samsung SGH-600

You can try these in box we downloaded depraved or exclusive Java midlets or alternative media, which have been causing problems with a phone.
*2767*JAVA# Java Reset as well as (Deletes all Java Midlets)
*2767*MEDIA# Reset Media (Deletes All Sounds as well as Pics)
*2767*WAP# Wap Reset
*2767*CUST# Reset Custom EEPR0M
*2767*FULL# Reset Full EEPR0M (Caution)
For e.g. : *2767*JAVA# would be keyed in as *2767*5282#
Note : Not all codes will work with SGH-C100.

Other Samsung Codes
*#06# IMEI code
*#9998*4357# Help Menu
*#9998*5282# Java menu (GRPS/CSD settings for JAVA server)
*#9999#0# Monitor Mode
*#9999# or *#9998*9999# Software Version
*#8888# or *#9998*8888# Hardware Version
*#9998*746# or *#9998*0746# or *#0746# Sim Infos
*#9998*523# or *#9998*0523# or *#0523# Display Contrast
*#9998*842# or *#9998*0842# or *#0842# Vibration On (until we pull OK)
*#9998*289# or *#9998*0289# or *#0289# Buzzer On (until we pull OK)
*#9998*288# or *#9998*0288# or *#0288# Battery & Field Infos
*#9998*377# or *#9998*0377# Error log
*#9998*778# or *#9998*0778# or *#0778# Sim Service table
*#9998*782# uncover date as well as warning clock
*#8999*638# uncover network information
*#9998*5646# shift user trademark during startup
*#9998*76# prolongation number
*#9998*968# perspective tune for alarm
*#9998*585# Non-Volatile Memory (NVM)
*#3243948# Digital Audio Interference Off
*#32436837# Digital Audio Interference On

SAMSUNG T100 SECRET CODES
============================
*#06# -> Show IMEI
*#9999# -> Show Software Version
*#0001# -> Show Serial Parameters

*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!!!! though additionally shift IMEI to 447967-89-400044-0, we contingency have make use of of CHGIMEI to revive it)

*2767*2878# -> Custom EEEPROM Reset
*#8999*228# -> Battery standing (capacity, voltage, temperature)
*#8999*246# -> Program standing
*#8999*289# -> Change Alarm Buzzer Frequency
*#8999*324# -> Debug screens
*#8999*364# -> Watchdog
*#8999*377# -> EEPROM Error Stack
*#8999*427# -> Trace Watchdog
*#8999*523# -> Change LCD contrariety
*#8999*544# -> Jig acknowledge
*#8999*636# -> Memory standing
*#8999*746# -> SIM File Size
*#8999*778# -> SIM Service Table
*#8999*785# -> RTK (Run Time Kernel) errors
*#8999*786# -> Run, Last UP, Last DOWN
*#8999*837# -> Software Version
*#8999*842# -> Test Vibrator
*#8999*862# -> Vocoder Reg
*#8999*872# -> Diag
*#8999*947# -> Reset On Fatal Error
*#8999*999# -> Last/Chk
*#8999*9266# -> Yann debug shade (=Debug Screens?)
*#8999*9999# -> Software version

SAMSUNG V200 SECRET CODES

v200 Unlock Code-> *2767*7822573738#
*#9324# Netmon (press a personal problem pass to exit)
*#9998*JAVA# Edit GPRS/ CSD settings (S100 Only)
*#9998*Help# Help screen/ List of codes
*#9998*LOGO# Change user Logo
*#9998*RTC# RTC Display
*#9998*Bat# Battery Status
*#9998*Buz# Turns Buzzer ON
*#9998*Vib# Turns Vibrator ON
*#9998*LCD# LCD Contrast
*#9998*9999# Softwre Version
*#9998*8888# Hardware Version
*#9998*377# NVM Error Log (?????)
*#9998*NET# SIM Network ID
*#9998*778# SIM Serv. Table
*#9998*SIM# SIM Info
*#9998*PN# Production No.
*#9998*968# Reminder Tune
*#9998*NVM# Displays Non-Volitile Memory Status
*#9999*C# ???????????????????
*#06# Displays phones I**I No.
***/// ***/// NOTE /// *** RED COLOR , they crop up critical !!! Use during
own risk !!!
*#9998*2576# Forces SIM Error
*#9998*DEAD# Forces Phone Crash
*2767*MEDIA# Resets a medis upon a phone (deletes all downloaded
pics/tones)
*2767*FULL# Resets a EEPRON *DANGEROUS*
*2767*CUST# Resets a Custom EEPRON
*2767*JAVA# Resets JAV downloads (deletes all downloaded midlits)
*2767*STACKRESET# Resets Stack
*2767*225RESET# ????????????????? * Dangerous *
*2767*WAP# Resets WAP Setting & Deletes Favorites

SAMSUNG A800 SECRET CODES

The concept clear formula is *2767*637# do this with out your sim in
By default, a firmware (software) for x600 usually receives java
apps as well as alternative applications similar to things by method port.
but even for it, we have to capacitate a method port, which additionally
causes
the shutting of all alternative ports, even a IrDA as well ..
well, theory what, i have really great headlines for you,
do we know, we can enlarge a receptive to advice level,
the receptive to advice turn for tones, orator fone, etc,
can be enlarge even afterwards if it is during max (level 4)
you still can do it,
just follows a instructions!

**************** HERE WE GO **************
Enter a following code:
*#8999*8378#
(You’ll be shown menu, afterwards …)
then go to:
“H/W test”
then go to:
“Audio Settings”

then go to:
“Melody Gain”

There will we see a number.
there have been 5 (5) Melody Levels” of it.
(and currently, we have been during turn 1 as well as after
pressing a “save” button, we will pierce to
level 2 as well as so upon …………………….)
you have to shift a values of all a levels.
and as a resultant, it will give enlarge a
melody sound!, your tones will some-more louder,
even some-more louder afterwards a max. toll volume.
the turn correct numbers are: (as a my environment )

Melody Level 1: 13
Melody Level 2: 17
Melody Level 3: 18
Melody Level 4: 25
Melody Level 5: 31
you even can have your own combinations of turn wise
sounding numbers which can shift a receptive to advice level!.

if your multiple means some-more louder receptive to advice level,
then mine,
then do share it with a group! …
meanwhile, try my figured-out combination!

************ CAUTION ************
if anything goes wrong,
then we can request a master reset code,
that will NOT undo anything, ANYTHING from your
cell fone, though set any as well as eveything to its
default/standard environment …
(likes, bureau settings )
the master reset formula is:
#*7728#

#########################################
I take no shortcoming of these codes have been operative or not,
or a goods upon your dungeon fone
but i have attempted these codes upon my dungeon fone.
and i bet, zero goes wrong,
but even afterwards of my words, be carefull!,
#########################################
The code: *#8999*8378#
as i regarded it a ominous code,
will discuss it we any as well as all about your dungeon fone.
and in a “H/W test”,
there have been lot of alternative Audio settings,
each of them carrying 5 (5) levels,
you can shift a combination, though prior to you do anything,
do write a defult series method to a little place so that
you’ll be afterwards means to upset it again! .. …
#*2558# – Time ON
#*2527# – GPRS Switching Set to category {4/8/9/10}
#*4263# – Handsfree Mode: ACTIVATED
#*53696# – [Java dnload] WAPSAR mode
#*536961# – WAPSAR capacitate HTTP disable
#*536962# – HTTP capacitate WAPSAR disable
#*536963# – SERIAL capacitate Others disable
#*5663351# – [Phone Model] SAMSUNG SGH-X100
#*6420# – Mic off
#*6421# – Mic on
#*7632# – Sleep mode
*#8999*523# – Main LCD Brightness
*#8999*3825523# – (?) External arrangement
*2767*3855# – Full EEPROM reset(Reset all sort of locks)also you’ll
lose cinema as well as java not melody
Remove camera sound:
On categorical shade type:
*#8999*8378# –> Test mode
H/W test
Audio Settings
Melody Gain
Then reinstate 6 by 0, it’ll uncover twelve though it’s OK
Press behind until categorical screen
Then press pass volume to smallest as well as let’s try !!! no some-more sound
tip by C-Quest

*2767*688# resets a phone
Thats all!!!!!!!!!!!!!!!
Samsung X100 Tricks

#*0000#
#*0400#
#*1200# – AFC DAC Val
#*1300# – IMEI
#*1400# – IMSI
#*1700# – ( ) Command #*1700 Executed
#*1800# – ( ) Command #*1800 Executed
#*1900# – ( ) Command #*1900 Executed
#*2000# – ( ) Command #*2000 Executed
#*2100# – ( ) Command #*2100 Executed
#*2200# – ( ) Command #*2200 Executed
#*2252# – Current CAL
#*2255# –
#*2256# – Calibr.-Info
#*2282#
#*2285#
#*2286# – Databattery
#*2337# – ( ) Permanent Registration – Not Yet Implemented
#*2355#
#*2400# – ( ) Command #*2400 Executed
#*2474# – For CMD Set – DEBUGBATTERY in cihard.opt
#*2527# – GPRS Switching Set to category {4/8/9/10}
#*2558# – Time ON
#*2562#
#*2565#
#*2677# – AMR State: {None / Full Rate}
#*2679# – Copycat Feature: {ACTIVATED/DEACTIVATED}
#*2787# – CRTP {ON/OFF}
#*2834# – Audio trail Mobile Normal
#*2836# – AVDDSS Management: {DEACTIVATED/ACTIVATED}
#*3230# – Trace Enable DCD disable
#*3231# – Trace invalidate DCD Enable
#*3232# – Current Mode {Trace enabled/DCD enabled}
#*3270# – DCS Support: {DEACTIVATED/ACTIVATED}
#*3282# – Data: {DEACTIVATED/ACTIVATED}
#*3333#
#*3353# – General Defence Code Erased
#*3370#
#*3377#
#*3476# – EGSM: {DEACTIVATED/ACTIVATED}
#*3676# – Flash Volume Formated
#*3683#
#*3737# – Some Codes
#*3777#
#*3779#
#*3825# – ( ) Command #*3825 Executed
#*3837#
#*3849#
#*3851#
#*3876#
#*3877# – Dump of SPY Trace
#*3900#
#*3940# – External looptest 9600 bps not accessible in SYSOL2
#*3940# – External looptest 115200 bps not accessible in SYSOL2
#*3941#
#*4200#
#*4263# – Handsfree Mode: ACTIVATED
#*4300#
#*4500#
#*4674# – IMSI| MCC:2 5 0 | MNC 9 2 | 10 eleven 91 83 50
#*4700# – Half Rate: {ACTIVATED/DEACTIVATED}
#*4760# – GSM: {ACTIVATED/DEACTIVATED}
#*4864#
#*5100#
#*5111# – ( ) Some Codes
#*5132#
#*5133# – ( ) Some Codes
#*5143#
#*5156#
#*5165#
#*5171# – ( ) Some Codes
#*5172# – ( ) Some Codes
#*5173# – ( ) Some Codes
#*5174#
#*5175#
#*5176# – ( ) Some Codes
#*5177#
#*5187# – L1C2G trace: {ACTIVATED/DEACTIVATED}
#*53696# – [Java dnload] WAPSAR mode
#*536961# – WAPSAR capacitate HTTP disable
#*536962# – HTTP capacitate WAPSAR disable
#*536963# – SERIAL capacitate Others disable
#*5376#
#*5400# – ( ) Command #*5400 Executed
#*5500#
#*5600#
#*566335# – [WAP indication ID]
#*5663351# – [Phone Model] SAMSUNG SGH-X100
#*5663352# – [Java Model] SEC-SGHS300/1.0
#*5737425# – Java Serial
#*577699# – APN
#*5800# – ( ) Command #*5800 Executed
#*6100# – ( ) Command #*6100 Executed
#*6200#
#*6420# – Mic off
#*6421# – Mic on
#*6422# – Mic dep RXdata
#*6428# – Mic measurement
#*6700#
#*6837# – Official Software Version
#*6900#
#*7200#
#*7222# – Operation Typ: Class C GSM
#*7224# – ERROR
#*7247#
#*7252# – Operation Typ: Class B GPRS
#*7271# – Multi slot: Class 1 GPRS
#*7274# – Multi slot: Class 4 GPRS
#*7276#
#*7284# – Class B
#*7287# – GPRS Attached
#*7288# – GPRS Detached
#*7326# – Accessory: Vibrator
#*7337# – Some kind of Reset Settings
#*7352# – Some Kind of Debug Info
#*7462# – SIM phase
#*7524# – KCGPRS
#*7562# – LOCI GPRS
#*7636#
#*7639#
#*7632# – Sleep mode
#*7633#
#*7638# – RLC regularly open finished TBF: {ACTIVATED/DEACTIVATED}
#*7646#
#*7665#
#*7666# – SrCell Data
#*7673# – Sleep mode
#*7676# – Command #*7676 Executed
#*7683# – Sleep variable
#*7693# – Sleep deact
#*7728# – RSAV done->reset
#*7763# – SMS dispatcher CS {ACTIVATED/DEACTIVATED}
#*7825#
#*7828# – Midl Rl51
#*7957# – Command #*7957 Executed
#*7983# – Voltage/Freq {DEACTIVATED/ACTIVATED}
#*7986# – Voltage {DEACTIVATED/ACTIVATED}
#*8462# – Sleep time given SwitchOff
#*8465# – Time in L1
#*8466# – Old Time
#*8645#
#*9278# – Command #*9278 Executed
#*9795# – wtls key: reset
#7263867# – RAM Dump {On/Off}
#7465625*228# – Activa close deactivated
#7465625*27*
#7465625*2827# – Auto CP close deactivated
#7465625*28638# – Auto Network close deactivated
#7465625*28746# – Auto SIM close deactivated
#7465625*2877# – Auto SP close deactivated
#7465625*28782# – Auto subset close deactivated
#7465625*638*
#7465625*746*
#7465625*77*
#7465625*782*
#8999*324#
*#0*
*#0020# –
*#06# – IMEI
*#2255# – Call List
*#4777*8665# – GPRS
*#7465625# – Interrogate ( )
*#8377466# – Software && Hardware Versions
*#8888# – Hardware Version
*#8999*324# – ( ) Some Strange Numbers
*#8999*377# –
*#8999*3825523# – ( )
*#8999*523# – Main LCD Brightness
*#8999*636# – ( ) Another Strange Numbers
*#8999*8376363# – . HW, SW, + Some Code And Data
*#8999*8378# – . , , , HW SW
*#9999# – Software Version

=== : ===

*2767*xx927 – WAP . xx – . , xx=44: *2767*44WAP# xx=31: *2767*31WAP#

*2767*xx667 – MMS.

.

*2767*2877368#
*2767*2878# – EEPROM ( , )
*2767*31667#
*2767*31927#
*2767*33667#
*2767*33927#
*2767*34667#
*2767*34927#
*2767*351667#
*2767*351927#
*2767*3700#
*2767*380667#
*2767*380927#
*2767*3855# – l EEPROM ( SP- !! ) IMEI 447967-89-400044-0, IMEI ( )
*2767*39667#
*2767*39927#
*2767*420667#
*2767*420927#
*2767*43667#
*2767*43927#
*2767*44667#
*2767*44927#
*2767*46667#
*2767*46927#
*2767*49667#
*2767*49927#
*2767*66335#
*2767*688# ( ) [Unlocking Code]
*2767*7100#
*2767*7300#
*2767*73738927# = *2767*RESETWAP#
*2767*7650#
*2767*7667#
*2767*7927#
*2767*8200#
*2767*927#

=== / : ===

*335#
*663867# – mm record dumped
*7465625# –
*7465625*228# – Activa close personalized
*7465625*27*
*7465625*2827# – Auto CP close activated
*7465625*28638# – Auto Network close activated
*7465625*28746# – Auto SIM close activated
*7465625*2877# – Auto SP close activated
*7465625*28782# – Auto subset close activated
*7465625*638*
*7465625*746
*7465625*746*
*7465625*77*
*7465625*782*

Mobtricks.com doesn’t explain any success of these codes.